Zoom FIRE-18 Operation Manual Download Page 2

 

2

 

ZOOM FIRE-18

 

SAFETY PRECAUTIONS

 

In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can 

be prevented. The meanings of these symbols are as follows:

 

This symbol indicates explanations about extremely dangerous 

matters. If users ignore this symbol and handle the device the wrong 

way, serious injury or death could result.

This symbol indicates explanations about dangerous matters. If users 

ignore this symbol and handle the device the wrong way, bodily injury 

and damage to the equipment could result.

 

Please observe the following safety tips and precautions to ensure hazard-free use of the FIRE-18. 

 

• Power 

requirements

 

•  Connect only to AC power outlets rated 100-120 V or 220-240 V 50/60Hz (depending on the 

voltage range of the unit; refer to the back panel). 

•  Ground the unit by connecting the ground terminal of the power plug to a good external 

ground. Do not ground to water pipe, gas pipe, telephone wiring, or lightning arrestor to 

prevent the risk of electric shock or explosion.

•  During lightning or when  not using the unit for an extended time, disconnect the power cord 

from the AC outlet.

•  Do not pinch the power cord, bend it forcedly, or place heavy objects on the power cord.

 

 

• Environment 

 

Avoid using your FIRE-18 in environments where it will be exposed to: 

• Extreme temperatures 

•  Heat sources such as radiators or stoves.

•  High humidity or moisture 

•  Excessive dust or sand 

•  Excessive vibration or shock 

Keep a minimum distance of 5 cm around the unit for sufficient ventilation.

Do not impede the ventilation openings with objects such as newspapers or curtains.

 

 

• Handling 

 

•  Never place objects filled with liquids, such as vases, on the FIRE-18 since this can cause 

 

USAGE AND SAFETY PRECAUTIONS

 

Caution

 

Warning

 

Warning

 

Warning

 

Warning

 

Warning

FIRE18-2E.fm 2 ページ 2004年7月9日 金曜日 午後7時1分

Summary of Contents for FIRE-18


























Reviews: