Zoom BFX-708 Operation Manual Download Page 21

ZOOM BFX-708

21

Using

the

Jam

Play

Function

Using the Jam Play Function

Besides its regular sampler, the BFX-708 incorporates a Jam Play feature that records and plays a bass phrase of up
to 2 seconds. This allows hold delay, and the phrase can also be played in reverse. The direction and speed of
playback can be controlled with the expression pedal, letting you achieve a "scratch" effect such as used by DJs. To
use Jam Play, select a patch for which the effect type of the REV module is set to JAM, and set the STYLE
parameter (playback method) and TRG/GT parameter (foot switch function) as desired. 

1

Select the patch to use with Jam Play. 

2

Activate edit mode, and select JAM as

effect type for the REV module (

p. 15).

Verify that the REV module is ON. 

3

Turn parameter knob 1 and select the

STYLE parameter (playback method for

recorded phrase). 

nM (Normal):

Play in normal direction. 

rS (Reverse):

Play in reverse direction. 

SC (Scratch):

Use expression pedal to play with

scratch type effect. From center position, pedal

controls either forward or reverse playback. 

4

When the STYLE parameter is set to "nM"

(Normal) or "rS" (Reverse), use parameter

knob 1 to set the TRG/GT parameter

(trigger/gate mode). 

When the STYLE parameter is set to "SC", this

parameter has no effect. 

5

Move to the PEDAL module and assign the

expression pedal to the REV module (

p. 22). 

6

Store the patch and return to the play

mode. 

tL 

(Trigger Loop)

Pressing 

 foot switch 

causes loop play

Pressing 

 foot switch during 

play stops play

GS 

(Gate One-Shot)

While 

 foot switch is 

pressed, one play run 
from start is performed

Releasing 

▼ 

foot switch 

stops play

GL 

(Gate Loop)

While 

 foot switch 

is pressed, loop play 
from start is performed

Releasing 

 foot 

switch stops play

rS 

(Retrigger One-Shot)

Pressing 

▼ 

foot switch 

causes one play run
 from start

Pressing 

▼ 

foot switch 

during play to restart 
from beginning

Recorded phrase

Play in normal direction

Play in reverse direction

tS

 (Trigger One-Shot)

Pressing 

 foot switch 

causes one play run from start

Pressing 

 foot switch 

during play stops play

Summary of Contents for BFX-708

























Reviews: