background image

ZOOM 506 II 

BASS

29

28

ZOOM 506 II 

BASS

PEDAL DEFRET (Pedal Defret) 

              Using the expression pedal (FP01/FP02) connected to the 
CONTROL IN jack, the defret effect intensity can be adjusted.

PEDAL BASS SYNTH (Pedal Bass Synthesizer) 

              Using the expression pedal (FP01/FP02) connected to the 
CONTROL IN jack, the mixing ratio of b2 effect sound and original sound 
can be adjusted.

PEDAL OCTAVE (Pedal Octaver) 

              Using the expression pedal (FP01/FP02) connected to the 
CONTROL IN jack, the mixing ratio of octaver effect sound and original 
sound can be adjusted.

OCTAVE (Octaver) 

This effect downshifts the sound by one octave and mixes it to the original 
sound. Higher right-digit setting values result in a higher effect sound ratio. 

OCTAVE > CHORUS (Octaver > Chorus) 

This effect type is a serial connection of octaver and chorus. Higher right-
digit setting values result in stronger octaver sound. (Chorus intensity is 
fixed.) 

BASS SYNTH (Bass Synthesizer) 

This effect creates the sound of a bass synthesizer. It is best suited for 
playing single notes. You can select among nine patterns (b1 - b9) with 
preset sound character and mixing balance. 

• b1: 

Bass synthesizer with fat low end and multiple harmonics (only 

effect sound is output) 

• b2: 

Bass synthesizer with resonant filter (only effect sound is output) 

• b3: 

Bass synthesizer with soft sound and few harmonics (only effect 

sound is output)  

• b4: 

b1 effect sound with a slight amount of original sound mixed in

• b5:

 b2 effect sound with a slight amount of original sound mixed in  

• b6: 

b3 effect sound with a slight amount of original sound mixed in

• b7: 

b1 effect sound and original sound in 1:1 ratio 

• b8: 

b2 effect sound and original sound in 1:1 ratio

• b9: 

b3 effect sound and original sound in 1:1 ratio   

b

1

b

9

o

1

o

6

o

7

o

9

d

P

b

P

o

P

PITCH SHIFT (Pitch Shift) 

This effect varies the pitch of the original sound. You can select one out of 
nine preset pitch shift patterns (P1 - P9). 

PEDAL PITCH DOWN (Pedal Pitch Down) 

Original sound

Original sound

Original sound

Original sound

              Using the expression pedal (FP01/FP02) connected to the 
CONTROL IN jack, the pitch of the effect sound can be shifted over the 
range of 0 to -1 octaves. 

PEDAL PITCH UP (Pedal Pitch Up) 

              Using the expression pedal (FP01/FP02) connected to the 
CONTROL IN jack, the pitch of the effect sound can be shifted over the range 
of 0 to +1 octave. 

 OFF (Off) 

Turns the MOD module off.

• P1/P2:

A component shifted by 1 octave down is mixed to the original 
sound. The mixing ratio differs for P1 and P2. 

• P3/P4:

A component shifted by a perfect fifth down is mixed to the 
original sound. The mixing ratio differs for P3 and P4.  

• P5/P6:

A component shifted by a perfect fourth up is mixed to the 
original sound. The mixing ratio differs for P5 and P6.

• P7/P8:

A component shifted by 1 octave up is mixed to the original 
sound. The mixing ratio differs for P7 and P8.

• P9:

A slightly pitch-shifted component is mixed to the original 
sound, resulting in a chorus with slight modulation. 

Pitch of effect sound vs. original sound

P1/P2:

P3/P4:

P5/P6:

P7/P8:

P

1

P

9

P

d

P

U

o

F

Effect sound

Effect sound

Effect sound

Effect sound

Ef
fect

T

ypes

a

nd

Parameters

Ef
fect

T

ypes

a

nd

Parameters

Summary of Contents for 506II Bass


















Reviews: