8
Peel off one piece of gray Velcro and stick it
on a clear, preferably flat area on the same
side of your iPod or other device as the
headphone jack. Remember, the further from
the jack the better, but it can’t be more than
3.75 cm (1.5 inches) from the jack. Now peel
off one piece of white Velcro from the other
strip, and carefully push the Velcro side (NOT
the sticky side) against the gray Velcro that
you already installed, so that the two pieces
stay together. Then plug in the Transmitter,
being careful that it's straight. Press it in place so that it pushes against
the sticky side of the white Velcro.When you first do this, you should leave
the Transmitter in place for at least one hour before pulling the Transmitter
and audio device apart. To be safe, we recommend that you leave them
attached overnight.
The top two LEDs on the Transmitter show you the mode it’s in.
Both LEDs off
Idle
Both LEDs steady on
Searching for last paired device
Red and blue LEDs alternating
Pairing
Blue LED flashing twice every three seconds
Paired and connected
Enjoy!
Remember. . . You can put iHiFi Receivers in different rooms or
even different locations. This lets you use your iHiFi Universal Transmitter
as you move from place to place. And one iHiFi Receiver can be used with
different iHiFi Transmitters at different times, so consider getting iHiFi
Transmitters for all your favorite audio devices.
