PAGE
6
P
AG
E
13
U
SI
N
G Y
OUR FAS
TB
A
C
K
PULL BACK SLOWLY
BY HOLDING NEAR
THE MOTOR HOUSING
The Fastback rear assembly has special ZOOB
connectors so you can make many different types
of vehicles. Make sure the rounded portion of the
motor housing is facing backward.
FRONT
BACK
MOTOR
HOUSING
Read these tips for
the best Fastback
racing performance.
Once you have built your vehicle,
you are ready to race!
1. With the wheels touching the
ground, hold your vehicle near
the motor housing and slowly
pull back.
3. Point and release your vehicle in a
safe direction, allowing for travel
distances of up to 25 feet or more.
TIP:
Vehicles with fewer pieces
will travel faster and farther
than those with
more pieces.
2. Continue to pull back until you hear
a clicking sound (this means the
motor is fully wound). Or, pull back
as far as you can reach. Then,
without lifting the wheels off the
ground, put your thumb on one of the
wheels (to keep it from moving). Lift
your car and put it back where you
started (on the ground). Remove your
thumb and pull your car back again.
Repeat until you hear a clicking
sound.
The ZOOB Fastback uses
a special rear wheel
assembly with a wind-up spring
motor that never needs batteries.
