Page 5
©2017 ZOO FANS INC. ALL RIGHTS RESERVED
1650 38
th
St, Suite 201W Boulder, CO 80301 PHONE: 303-557-1852
zoofans.com
REV 10042017
ELECTRICAL WIRING
STEP 1. Remove the cover plate from the Junction Box
1.
Remove the two screws
—
one at each side on the top
—
that hold the cover plate and remove it:
STEP 2. Secure the Fan Wire and Attach the Junction Box to the Mounting Plate
1.
Place the wire from the junction box on the motor through the hole in the side of the plenum
2.
Put the wire through the strain relief that is already attached to the mounting plate, with the screws
facing in toward the fan and secure the strain relief by tightening the two screws:
