manualshive.com logo in svg

Zontes ZT310T-M, Maintenance Manual

Share
Download
Zontes ZT310T-M Maintenance Manual Download Page 9

 

  9 / 184 

 

1. Disassemble the fuel tank assembly .......................................................................................................... 119

 

2. Disassemble the fuel pump ........................................................................................................................ 121

 

4. Remove the external parts of the fuel tank assembly. ............................................................................... 121

 

Examination ........................................................................................................................................................... 121

 

1. Fuel pressure test ....................................................................................................................................... 121

 

2. Fuel pump inspection.................................................................................................................................. 121

 

3. Oil level sensor ........................................................................................................................................... 122

 

 
7. Cooling system .......................................................................................................................................................... 123

 

Know Before Service ............................................................................................................................................. 123

 

Troubleshooting ..................................................................................................................................................... 123

 

1. The engine temperature is too high: ........................................................................................................... 123

 

2. The engine temperature is too low: ............................................................................................................ 123

 

3. Coolant leakage .......................................................................................................................................... 123

 

Coolant system distribution map ............................................................................................................................ 124

 

Coolant flow diagram ............................................................................................................................................. 125

 

Cooling system disassembly ................................................................................................................................. 126

 

Remove the radiator assembly ....................................................................................................................... 126

 

Coolant system hoop/clamp distribution map ................................................................................................. 128

 

Thermostat assembly and small loop ............................................................................................................. 128

 

Cooling system accessories .................................................................................................................................. 129

 

1. Main water tank .......................................................................................................................................... 129

 

2. Attention to the water tank filling port: ........................................................................................................ 130

 

2.1 Overall leak check ............................................................................................................................. 130

 

2.2 Check of pressure relief valve ........................................................................................................... 130

 

3. Auxiliary water tank ..................................................................................................................................... 130

 

4. Aluminum inlet pipe and aluminum outlet pipe ........................................................................................... 130

 

5. Small water tank ......................................................................................................................................... 130

 

6. Water and oil shared sensor ....................................................................................................................... 131

 

7. Thermostat .................................................................................................................................................. 131

 

7.1 Inspection .......................................................................................................................................... 131

 

7.2 Failure phenomenon ......................................................................................................................... 131

 

7.3 Disassembly ...................................................................................................................................... 132

 

7.4 Thermostat core inspection ............................................................................................................... 132

 

8. Water pipe .................................................................................................................................................. 132

 

9. Check the water pump cover assembly ...................................................................................................... 132

 

 
8. Braking system .......................................................................................................................................................... 133

 

Know Before Service ............................................................................................................................................. 133

 

Trouble shooting .................................................................................................................................................... 134

 

Soft feeling from brake lever ........................................................................................................................... 134

 

Hard feeling from brake lever ......................................................................................................................... 134

 

Disassemble the disc brake main pump and calipers ........................................................................................... 134

 

Disassemble the front disc brake main pump................................................................................................. 134

 

Disassemble the rear disc brake main pump ................................................................................................. 135

 

Disassemble the front disc brake caliper ........................................................................................................ 135

 

Disassemble the rear disc brake caliper ......................................................................................................... 136

 

Brake hose and wheel speed sensor ..................................................................................................................... 137

 

Summary of Contents for ZT310T-M

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands