background image

 

 

5

5

Log-on and Log-off Procedure 

 

Log-on 

Before the keyboard can be used an operator has to log-on by selecting their user name and entering a PIN. To log-on follow 
the procedure below. 

01. Press the 

Softkey 

directly adjacent to the menu option, LOG-ON. 

02. Use the 

Next 

key to highlight your user name and press 

Enter.

 

03. Now enter your PIN using the Numeric Keypad and press 

Enter.

 

04. You should now be Logged onto the keyboard. However the error message LOG-IN INCORRECT, simply repeat 

steps 01 to 03. 

 

 

Log-off 

Logging-off the ZVK-77D keyboard is achieved from the Select Mode Menu. To get back to this menu it does not matter 
which menu you are currently in, simply press and hold down the Back key until the message: 

 

 

 

 

 

Every time you exit a menu you will hear a confirmation beep from the keyboard. Press the Enter key to log yourself off the 
ZVK-77D or press the Cancel key to remain logged-on. 

 

 

Mode Selection 

Once logged onto the ZVK-77D the Select Mode Menu will be displayed. Depending on how the keyboard has been 
configured for a particular user will determine which modes of operation are available. Below is a description of each mode 
available and how to access them. 

LOG OFF ? 

 

[Enter] = Confirm 

[Clear] = Cancel 

Summary of Contents for ZoneVu ZVK-77D
















Reviews: