3
Wall Mount Installation
ZWA1207 can be mounted on the wall by using the holes on the bottom of
the mounting base. When installing ZWA1207 on a wall, the mounting kit
must be first installed onto the wall.
1.
Determine the optimal location
for ZWA1207 before beginning
.
2.
Mark 2 holes 10cm apart from
each other by pencil and drill the
holes into the wall.
Note:
Ensure you are using the
3mm (1.8 inch) drill bit size and
type for the wall.
3.
Hammer the included anchors
into the wall until seated flush.
4.
Drive the included screws into
the anchors until leaving
approx. 5mm screw exposed.
Leave Approx. 5mm
All manuals and user guides at all-guides.com
