Features
1.
MICROPHONE:
Voice input for outgoing audio.
2.
SPEAKER:
For output of incoming audio.
3.
TALK button:
3.1) Press once to manually take an incoming call.
3.2) Press and hold for 5 seconds to redial the last number called from the phone.
4.
HANG UP button:
4.1) Press once to hang up a call.
4.2) Press and hold HANG-UP button for at least 5 seconds to get into Pairing Mode.
5.
VOLUME UP or DOWN button:
Adjust the volume in 8 pre-set levels. Press once for volume increase or decrease.
6.
AUTO ANSWERING or MANUAL ANSWERING switch:
Switch it up with the letter “A” showing on the switch enables Auto Answering. Switch it
down with the letter “M” showing on the switch enables Manual Answering.
7.
FIXING SCREW:
Adjust to a proper angle then secure the ZUB8300 with this screw.
8.
CAR CIGARETTE LIGHTER HEAD:
Plug this part into a standard car cigarette lighter jack.
1
Introduction
The ZUB8300 Bluetooth Car Kit provides hands-free communication using cell phones. It
requests no professional installation. This user guide focuses on establishing a connection with
your mobile phone. You need to have a phone with embedded Bluetooth capability. The phone
can be tucked away in your pocket or in a bag while you handle incoming call and outgoing calls,
and adjust the volume up or down using the buttons on the car kit. The power for the ZUB8300
comes from the car cigarette lighter jack. This device utilizes Bluetooth wireless technology. Any
device that you want to work with this car kit must be compatible with Bluetooth technology
version 1.1. that supports Bluetooth
HEADSET
and/or
HANDSFREE
profile.
Make sure that you have paired the ZUB8300 with your Bluetooth phone or other Bluetooth
devices before you start to use it.
What's in the package?
1. One ZUB8300 Bluetooth car kit.
2. User Manual
How to use ZUB8300
Pairing car kit with a Bluetooth cell phone
Before using ZUB8300 for the first time, you must pair ZUB8300 with a Bluetooth phone. The
Bluetooth audio connection between the car kit and your phone can be established by setting up
a PAIRED link. ZUB8300 will only store pairing info for one phone. If you intend to use this car
kit with another cell phone, please repeat pairing procedure below.
A.
Check your mobile phone’s user guide, then, find out the locations of the Bluetooth
menu in your phone, and turn Bluetooth on.
B.
Plug the ZUB8300 into the car cigarette lighter jack, turn on the car, and you will
hear two “do do” sounds which mean that ZUB8300 is in
Standby
.
C.
Press and hold the HANG UP button for 5 sec., then a “do lu do lu do” melody will be
played, release the button. Now the ZUB8300 is in Pairing Mode ready to be found
by your phone. The Blue light will flash quickly.
D.
Perform “Bluetooth device discovery” on your cell phone. It takes few seconds to
search for and find other Bluetooth devices around you.
E.
Phone display will show “ZUB8300 Car Kit” as found and ask for your confirmation
that you want to pair with it. Please confirm this.
F.
Enter passkey “1234”
when your phone prompts you. The phone will start to pair
with ZUB8300.
G.
Your phone will then advise that pairing has been successful. The blue light of
ZUB8300 will flash one time per second.
If pairing failed, the blue indication keeps flashing rapidly for 2 minutes. Please repeat steps D
to G for pairing again. Over 2 minutes, the blue indication will go back to normal, and a
re-pairing procedure is needed. Please refer to step C to G above.
2