59
To enable NAT function, please select “Enable” for “Enable NAT module
function” to disable, please select “Disable”. After you made the selection,
please click “Apply” button and the following message will be displayed on
your web browser: Please click “Continue” to back to previous setup menu;
to continue on other setup procedures, or click “Apply” to reboot the router
so the settings will take effect (Please wait for about 30 seconds while router
is rebooting).
3-2-2. Port Forwarding
This function allows you to redirect a single port or consecutive ports of
Internet IP address to the same port of the IP address on local network. The
port number(s) of Internet IP address and private IP address (the IP address
on local network) must be the same. If the port number of Internet IP
address and private IP address is different, please use “Virtual Server”
function, described in next section.
Please click “NAT” menu on the left of web management interface, then click
“Port Forwarding”, and the following message will be displayed on your web
browser:
Summary of Contents for ZSR4124WE
Page 1: ......
