41
Q4. I can browse ZSR1134WE’s Web-based Configuration Utility but
cannot access the Internet.
Check if the WAN LED is ON. If not, verify that the physical connection
between ZSR1134WE and the DSL/Cable modem is firmly connected. Also
ensure the DSL/Cable modem is working properly.
If WAN LED is ON, open the System Overview page of the Web configuration
utility and check the status group to see if ZSR1134WE’ s WAN port has
successfully obtained an IP address.
Make sure you are using the correction method (Dynamic IP Address, PPPoE,
or Static IP) as required by the ISP. Also ensure you have entered the correct
settings provided by the ISP.
For cable users, if your ISP requires a registered Ethernet card MAC address,
make sure you have cloned the wireless client’ s MAC address to the WAN port
of ZSR1134WE. (Refer to
MAC Address
field in
WAN Setup
.)
Q5. My wireless client cannot communicate with another Ethernet
computer.
Ensure the wireless client functions properly. You may open the Device
Manager in Windows to see if the adapter is properly installed.
Make sure the wireless client uses the same SSID and security settings (if
enabled) as ZSR1134WE.
Ensure that the wireless client’s TCP/IP settings are correct as required by
your network administrator.
If you are using 802.11b wireless adapter, but selecting the
802.11G
Mode in
Wireless Basic Setting
page; it is not configured to use 802.11g
Performance.
Use the ping command to verify that the wireless client is able to
communicate with ZSR1134WE’s LAN port and with the remote computer. If
the wireless client can successfully ping ZSR1134WE’ s LAN port but fails to
ping the remote computer, then verify the TCP/IP settings of the remote
computer.
All manuals and user guides at all-guides.com
