Features
‧
Plug & Play
‧
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards
‧
NWAY Auto-negotiation support, Auto-Sense the transmission speed, half/full duplex
‧
8 ports 10/100/1000M Auto-Sense, Auto-MDI/MDIX
‧
Adopt IEEE802.3x flow control for full-duplex and backpressure for half-duplex
‧
Non-blocking wire-speed transfer
‧
Adopt store and forward structure
‧
MAC address auto learning
‧
Support IEEE802.3x for broadcasting storm control
Package Contents
‧
One 8-Port Gigabit Switch
‧
One Quick Installation Guide
‧
One Power Adapter
‧
Four rubber pad
Front Panel
‧
LED lights panel
LED
Status Operation
Power
Green Lit: Power is on
10/100M Link
Green
Lit: Indicates a 10/100M device is connected
Flash: the port is transmitting/receiving data
Not lit: Indicates there’s a 10M device or no device connected
Full Duplex
(FDX/COL)
Green
Lit: Indicates this port is working under full duplex mode
Flash: the port is working under half duplex mode
Not lit: Indicates this port is working under half duplex mode
1000M Link/Act Green
Lit: Indicates a 1000M device is connected
Flash: the port is transmitting/receiving data
Not lit: Indicates there’s a 10/100M device or no device connected
Rear Panel
‧
RJ45 ports
Side Panel
‧
Ventilation and cooling holes
Please make sure there is no substance block up these holes, and leave enough space at the two side of
the switch, so the switch can have a proper ventilation and cooling to avoid high heat inside the switch,
which may cause improper working of the system.
All manuals and user guides at all-guides.com
