Zone Spark, User Manual

Page: 3 / 21

3
II. SAFE OPERATION INSTRUCTIONS
The low speed vehicle is designed for a simple operation; however, please make sure
to observe the following safe operation instructions:
BEFORE OPERATING THE VEHICLE :
● ALWAYS read this first before you start driving the vehicle.
● ONLY authorized people should drive this vehicle, from the driver’s side ONLY.
● Drive the vehicle ONLY in areas where the vehicle is allowed by law or local
regulations and the conditions are safe to do so.
● DO NOT allow more people on the vehicle than the vehicles’ designed capacity.
● DO NOT overload the vehicle, otherwise, the motor may get damaged, and the
vehicle may lose control, putting the driver and passengers in danger.
● DO NOT operate the vehicle while under the influence of alcohol or drugs.
● DO NOT make the vehicle climb any slope beyond its grade ability.
● DO NOT overtake other vehicles at crossroads, in blind areas, or in any
dangerous areas.
● CHECK WITH YOUR LOCAL GOVERNING AUTHORITIES to ensure that
you remain in compliance with any laws, rules or regulations regarding the
operation of a Low Speed Vehicle. The Zone Spark meets FMVSS 500.517
(Federal Motor Vehicle Safety Standards for Low Speed Vehicles).
WHILE OPERATING THE VEHICLE:
●
Keep your entire body inside the vehicle, remain seated, buckle up with the seat
belts, and hold on while the vehicle is moving.
● Do not start the vehicle until all occupants are securely seated and fastened set
belts.
● Keep your hand on the steering wheel and your eyes on the path or road you are
travelling.
● Always back up slowly and watch behind you carefully. Vehicle does make a
beeping noise while in reverse.