Zonar Virtual Trainer, User Manual & Installation Manual

Page: 10 / 12

10
Limited Warranty
LIMITED WARRANTY: Zonar warrants that the Hardware provided
under this agreement is free from all material defects in workmanship
under normal use and service. Zonar’s warranty period for its
Hardware is as follows:
V3 Product Line - 5 Years
EVIRTM - 3 Years
All Other Hardware - 1 Year
The above warranty periods run from the date of shipment. Provided
that the Hardware is used and handled as intended, Zonar will
replace any failed or functionally impaired Hardware with equivalent
Hardware in terms of performance and functionality.
This warranty does not apply to any Hardware that has been
misused, altered, willfully abused or that has been damaged due
to improper installation by the customer.† Hardware installations
must follow Zonar’s equipment specific installation guidelines.† If
product returned is determined to be damaged due to any of the
aforementioned circumstances, the Customer will be charged the
price of a refurbished unit plus shipping and handling.
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY AND ZONAR’S
ENTIRE OBLIGATION UNDER THESE LIMITED WARRANTIES for
defective equipment is the repair and replacement of the equipment
free of charge by Zonar. Zonar shall not be liable to Customer or
any third party for any general, special, punitive, incidental, indirect
or consequential damages, or any lost profits or business, arising
out of Zonar’s Subscription Agreement.
FCC Compliance Statement (Part 15.19)
IC Compliance Statement (RSS-210)
This device complies with Part 15 of the FCC Rules and with RSS-
210 of Industry Canada (IC). Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Warning: (Part 15.21)
Changes or modifications not expressly approved by Zonar Systems
could void the user's authority to operate the equipment.
Caution: RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile
transmitting devices, the antenna(s) used for this transmitter must
be installed to provide a separation distance of at least 20cm (8
Inches) from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. Users and
installers must be provided with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure
compliance.
Use only supplied and approved antenna's. Use of unauthorized
antenna's or modifications could impair signal quality, void your
warranty and/or result in violation of FCC regulations.
Industry Canada Compliance Statements
"This device has been designed to operate with an antenna having
a maximum gain of [5] dB. Antenna having a higher gain is strictly
prohibited per regulations of Industry Canada. The required antenna
impedance is [50] ohms."
"To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent is
isotropically radiated power (EIRP) is not more than that required
for successful communication."
"The installer of this radio equipment must ensure that the antenna
is located or pointed such that it does not emit RF field in excess
of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada's website, www.hc-
sc.gc.ca/rpb."
WARRANTY & NOTICES
FCC/IC COMPLIANCE