4/10/2019
V4 User Manual and Installation Guide – Zonar Systems Support
https://support.zonarsystems.net/hc/en-us/articles/360017847851-V4-User-Manual-and-Installation-Guide
7/27
General Housekeeping
1. Capture all drill chips during drilling operations. Do not allow drill chips to fall onto electrical equipment,
furnishings, heating ducts, etc. Magnets, sticky tape, vacuums, physical barriers, etc. may all be used to accomplish
this task.
2. Remove excess sealant. Sealant should be debris/contaminant free (e.g. no drill chips), consistent, and uniform in
appearance.
3. Clip excess wire tie protrusions.
V4 Mounting
To comply with FCC RF exposure requirements for mobile transmitting devices, this device must be installed to provide
a separation distance of at least 25 cm (10 inches) from all persons. See General Guidelines.
The installation technician must record which V4 unit is being installed in each vehicle.
