6
Pure Air Control
Thank you for choosing Zonair3D products.
Please take a few minutes to read this manual carefully before using your PURE AIR CONTROL
EQUIPMENT RECEPTION
On receiving the equipment, unpack the unit and check it is in correct condition.
Inspect it and check that there are no parts missing and that it has no knocks or
blows.
The equipment is supplied with:
- A box containing 8 attachment brackets or supports, which are sent separately
to be fitted on site to the frame of the machine. It includes 8 M6 Allen screws to
secure the equipment to the required surface.
- An individual absolute filter test certificate along with this start-up guide
Open the inspection panel to check that nothing has moved during transport,
making sure the pre-filter, the GRSystem and the absolute filter are correctly
in place and secure. The inspection panel can be opened by loosening the 8 M6
Phillips screws (4 on each side). These must be tightened again correctly to ensure
the unit remains sealed.
GENERAL DESCRIPTION
The equipment is supplied fully factory wired and programmed.
It includes the following different sections: G4 pre-filter, GRSystem
TM
gas filter, fan
and H14 absolute filter.
PRODUCT
RANGE
PAC 500
FLOW
(m
3
/h)
MEASUREMENTS
H X W X L (mm)
500
310 x 972 x 1182
POWER
(kW)
0,169
ELECTRICAL
POWER SUPPLY
1F/230V, 50-60Hz
PAC 800
800
310 x 972 x 1182
0,338
1F/230V, 50-60Hz
PAC 1200 1200
346 x 972 x 1182
0,500
1F/230V, 50-60Hz
WEIGHT
(Kg)
84
85
92
AVAIL.
PRESSURE
(Pa)
355
280
460
Summary of Contents for PURE AIR CONTROL 1200V
Page 22: ...22 Pure Air Control ...
Page 23: ...23 Pure Air Control ...
Page 24: ...QUICK USER GUIDE_PAC500 800 1200V PURE AIR JUST BREATHE ...