Zonair3D AIR+ 600, User Manual

Page: 21 / 32

21 | Air+ 600
Getting started
GENERAL SAFETY INSTRUCTIONS
Air+ 600 is a portable air purification equipment with tested filtration efficiency.
It has three filtering stages: F7 pre filter, H14 absolute Hepa filter and the unique
GRSystem by Zonair3D
TM
for gas removal. This equipment includes electrical
components. It is therefore important that you carefully read the following safety
instructions before use.
· This equipment should not be used by people with reduced physical or mental
abilities without assistance or supervision.
· It is not a toy. Children should not use this equipment unless supervised by
an adult.
· Do not block the Air+ 600 air intake nor the air outlet from the Air+ 600.
·
Do not spill water or other liquids on the equipment.
· Do not switch on the equipment if any of the electrical components is damaged
or not operating correctly.
· If the power cord is damaged or broken, it can be replaced by a male/female
power cord such as those used for computers or similar equipment.
· Remember to switch off the equipment before unplugging it from the power
socket.
· Do not operate inside the unit, unless for filter replacement (refer to Maintenance
instructions). Any other operation must be carried out by personnel authorised by
Zonair3D
TM
.
·
Before disassembling any panel, check that the unit is not switched to the electric
power network.
·
Only use filters supplied by Zonair3D
TM
.
Positioning
·
Position the equipment in a large, ventilated space.
·
Do not position the equipment on a soft surface.
Always position the equipment on a flat, stable surface.
· Do not position the equipment close to explosives.
Welcome
Thank you for choosing Zonair3D
TM
and congratulations on your purchase of Air+
600. Please take a few minutes to read this manual before starting to use your
Zonair3D
TM
equipment in order to familiarise yourself with its operation.