4
STEP
Install strike and test alignment
IMPORTANT:
Make sure hole in
door frame is drilled a minimum
of 1" (25 mm) deep.
1. With the door closed, use
a flat-head screwdriver to
test if deadbolt works
smoothly.
2. Check alignment between
the latch and the strike,
making sure when the
deadbolt is extended, it is
going into the bolt hole and
not hitting the deadbolt
strike or door frame.
H
B
A
5
Install exterior assembly
STEP
IMPORTANT:
Keep metal tailpiece horizontal.
1. Before installation, make sure the latch
is fully retracted (in the unlocked position) .
2. Route the cable below the latch.
unlocked
