Getting Started
After connecting proper video & audio cables to your TV set and MP-100, Now, you can start to operate MP-
100 step by step.
- Power on your TV set first.
- Connect your Media Player to TV set.
Power on the system, and after a few second, the system will enter a guide menu.
- If the TV is distorted or flicking, press SETUP button and select TV type to match your TV system, NTSC or
PAL. Press ◄/► key of RC to select “Setup”icon
，
below items will be shown as picture:
On this page,press ► key,then press UP/DOWN key to select item,and press ◄/► key to adjust data.
The parameter setup includes the following items:
- TV TYPE: Select output mode,These are AUTO,NTSC,PAL.
- TV DISPLAY:Select display mode,These are NORMAL/PS(4:3),NORMAL/LB(full screen 4:3),
WIDE/HDTV(full screen 16:9).
- VIDEO OUTPUT:Select output resolution,These are SD INTERLACE, SD PROGRESSIVE,720P, 1080i.
- DOWNMIX
：
Select AUDIO output,These are LT/RT,STEREO.
- SPDIF OUTPUT:Select voice output,These are ANALOG
，
SPDIF/RAW,SPDIF/PCM.