User
’
s Manual
U-Pod
Portable USB Flash Disk
- 3 -
Driver Installation
A.
Installation Procedure for Win 98 / 98se
1. Do
NOT
plug in the
U-Pod
.
2. Insert CD driver disc and run
“
X:\U-Pod\application\Setup.exe
”
. (Letter
“
X
”
refers to the CDROM drive location.)
3. Plug in
U-Pod
into the computer USB port and Windows will install the driver
automatically.
4. Afterwards, in
“
MY COMPUTER
”
you will find new icon(s)
“
REMOVABLE
DISK
”
. This is the location of
U-Pod.
5. Now, you are able to access all features that provided by
U-Pod
.
** Please also read
“
UTILITIES
”
in this installation quick reference.
B.
Installation Procedure for Win Me / Win 2000 / Win XP
There is
U-Pod
driver support in Win Me / Win 2000 / Win XP. After you plug in
U-Pod
Windows will automatically install the driver. Just follow the simple
installation procedure, and finally, in
“
MY COMPUTER
”
you will find a new icon(s)
“
REMOVABLE DISK
”
.
Now, you are able to access all features that provided by
U-Pod
.
** Please also read
“
UTILITIES
”
in this installation quick reference.
** To
“
Uninstall
”
U-Pod
, plug off from the USB port.
C.
Linux
For Linux, you can use the following instructions to mount the USB disk on.
1.
Execute cd /etc/sysconfig (cat /etc/sysconfig/hwconf |more)
2.
Check the device information in hwconf and write down the mount point (e.g.
/dev/sda)
3.
Make a directory in /mnt (e.g. mkdir /mnt/flashdisk)
4.
Mount the device on (e.g. mount /dev/sda/mnt/flashdisk if mount point is
/dev/sda)
