88
Starting a Study
1. Press and hold down the Monitor Power Button to begin powering the device.
2. After approximately three seconds, the Monitor vibrates, briefly displays an
ECG (Fig. 7), and then displays the message MONITORING Please connect all
electrodes for best results. Thanks! (Fig. 8).
3. Open the Electrodes package and attach the Patient Cables to the Electrode
Snaps.
4. Remove the protective backing from the Electrodes.
5. Place the Electrodes on your body as indicated in Fig. 9. For more details on
Electrode Application
see page 12.
Figure 7
Figure 8
Operation
Figure 9
right side
of body
left side
of body
