Zolix Instruments SC300 Operation Manual Download Page 18

 
 
         

         

 

 

                                                         

Certifications and Warranty

 

 

16

   

Zolix Instruments Co., Ltd.

     

http://www.zolix.com.cn  E-mail:[email protected]

 

                                                                                                                                                         

10. Certifications and Warranty 

Zolix Instruments Corporation (Zolix) certifies that this instrument has been 

thoroughly tested and inspected and found to meet the specifications given by Zolix 

when it was shipped from the factory. 

 

Zolix Instruments Corporation (Zolix) instruments and accessories are warranted for a 

period of one full year from date of delivery to be free from defects in material and to 

conform to the specifications given by Zolix. The corporation’s obligation under this 

warranty is limited to servicing or adjusting an instrument returned to the factory, 

prepaid, and to repairing at the factory any part or parts thereof All purchased items 

carry the original manufacturers’ warranty. 

Zolix Instruments Corporation shall not be liable for consequential damages resulting 

from accident, alteration, and improper installation, operation on low or excessive 

voltages or use in violation of the operating instructions given by Zolix. 

If any defect appears within the warranty period, the purchaser shall promptly notify 

Zolix No material will be accepted for repair or replacement without prior authorization 

from Zolix Upon such authorization and in accordance with instructions of Zolix, parts, 

materials or equipment for which repair or replacement is requested shall be returned 

to Zolix for examination, with shipping charges prepaid by the purchaser. Final 

determination as to whether a product or part is actually defective rests with Zolix 

Instruments Corporation. 

In such cases where necessary repairs are not covered by this warranty, an estimate 

of repair charges will be submitted to the purchaser before servicing the equipment. 

Zolix Instrument Corporation reserves the right to make changes or improvements 

upon its products without imposing any obligations upon it to install the same upon its 

products previously manufactured. 

This warranty is expressly in lieu of all other obligations or liabilities on the part of 

Zolix, and Zolix neither assumes, nor authorizes any other person to assume for them 

other obligations or liability in connection with the sale of equipment manufactured by 

Zolix Instruments Corporation. 

 

Summary of Contents for SC300























Reviews: