Zokop SF311-36G, Manual

Page: 7 / 10

7
USING THE MANUAL AND REMOTE CONTROLS
Note: This panel contains the buttons to properly operate the electric fireplace.
The buttons on the control panel on the side of the electric fireplace and the remote control function in the same way. The remote control has an
effective range of up to 13 feet.
1. Digital display unit
2. Function indicator
3. Timer button
4. Thermostat button
5. Flame control button
6. Power ON/OFF button
7. Week timer
8. Week timer adjustment
USING THE POWER ON/OFF BUTTON
1. Pressing the Power on/off button (6) once to turns the unit on.
2. Pressing the Power on/off button (6) again will turn the unit off.
3. If you find that none of the other buttons appear to work, check
to make sure that the Power on/off button (6) is turned on.
USING THE FLAME CONTROL BUTTON
Pressing the flame control button (5) to turn on the flame effect. To press the flame control button (5) to adjust the flame brightness,
there are 3 levels of flame brightness, L3-L2-L1-L3.
USING THE THERMOSTAT CONTROL BUTTON
1. Pressing the thermostat control button (4) to turn on the heating function.
2. Pressing the thermostat control button (4) to cycle through the different heat settings, 17
°
C-18
°
C-19
°
C-.…-26
°
C-27
°
C-0N-OFF
3. To display the temperature setting in either Fahrenheit or Celsius, press the thermostat button (4 ) of control panel once,
then press and hold the power on/off button (6) of the control panel for 5 seconds.
4. The display will switch between Fahrenheit or Celsius.