![background image](http://html1.mh-extra.com/html/zokop/alw-j02/alw-j02_instruction-manual_3982490004.webp)
Be careful when handling the stainless steel sieve. Do not touch the small sharp
blades inside the sieve.
Place the motor base on a flat, dry surface such as your kitchen worktop. Ensure that the
3-position switch is in the off (0) position, then switch the appliance off at the power outle
and unplug the cord
.
1. Fit the bowl onto the motor base. The spout on the filter bowl should be on the same
side of the motor base as the safety locking arm
2. Gently push the sieve down onto the motor base drive coupling until it clicks into
place. Make sure that the sieve is fitted securely inside the bowl and onto the drive
coupling.
3. Place the juicer cover over the bowl. The feed chute should be positioned over the
stainless steel sieve
4. Pivot the safety locking arm upwards until it engages with the two grooves in the
juicer cover. The safety locking arm should now be vertical and locked into place on
the top of your juicer. If the arm doesn’t fit into place easily, don’t force it. Check that
you have fitted the juicer cover correctly.
5. Tilt the large pulp container slightly and place it underneath the pulp outlet side of the
juicer cover.
6. Fit the lid onto the juice jug. Position the juice jug over the juice outlet spout on the
right hand side of your juicer.
7. Slide the food pusher into the feed chute. The food pusher has a groove in it which
must be lined up with the protrusion inside the feed tube.
Specification
ALW-J02
Principle
How to USE
4
▲
▲
▲
2
3
1
5
▲
↓
↓
↓
↓
↓
6
▲
↓
AC120V
~
60Hz
600W
LED
P
0
1)
2
120V~60Hz
×
M
~
!
2
3