ZOJE ZJ9700, Operation Manual, Page: 30 / 86

- 25 -
12.Installing the thread stand (Fig.14)
l)Assemble the thread stand unit,and insert it in
the hole in the machine table.
2)Tighten locknut
① to fix the thread stand.
3)For ceiling wiring, pass the power cord
through spool rest rod
② .
13.Replace the counter knife and moving knife (Fig.16,Fig.17,Fig.18.1)
l.The method of tearing down the counter knife
l).Put dom the sewing machine
2).Take down the screw
①
and positioning
Finger ②.
3).take down the screw ③ and counter knife ④
※ Please the grinding the counter knife when it is not good for cutting thread
2.The method of tearing down the moving knife
l).Lifting the preser foot for using hand lifter
2).Take down the screw
⑤ ,put down the needle plate ⑥
3).Turn the wheel and stop the needle bar ni its highest posttion
4).Drive the knife link
⑦ as illustrated by the arrows ,and stop to the position when screw ⑧ is
unfolded
5).Take down the grew 9and moving knife
Attention:
1.Please take down the needle before removing the needle plate and moving knife
2).Assemble by reversing sequence