background image

 

1

Safety Instruction 

1.

 

Users are required to read the operation manual completely and carefully before installation 
or operation. 

2.

 

This product must be installed or operated by properly trained personnel. All power must be 
turned off during installation, and remember not to operate with power. 

3.

 

All the instruction marked with sign 

  must be observed or executed; otherwise, bodily 

injuries might occur. 

4.

 

For perfect operation and safety, it is prohibited that using extension cable with multi-outlet 
for power connection.   

5.

 

When connecting power supply cords to power sources, it is necessary to make sure that the 
power voltage matches the rated voltage ±20% indicated on the motor’s name plate. 

6.

 

Do not operate in direct sun light, outdoors area and where the room temperature is over 
45°C or below 0°C. 

7.

 

Please avoid operating near the heater at dew area or at the humidity below 10% or above 
90%. 

8.

 

Do not operate in area with heavy dust, corrosive substance or volatile gas. 

9.

 

Avoid power cord being applied by heavy objects or excessive force, or over bend. 

10.

 

The earth wire of power cord must be connected to the system ground of the production plant 
by proper size of conductions and terminals. This connection should be fixed permanently. 

11.

 

All the moving portions must be prevented to be exposed by the parts provided. 

12.

 

Turing on the machine in the first time, operate the sewing machine at low speed and check 
the correct rotation direction. 

13.

 

Turn off the power before the following operation

 

1. Connecting or disconnecting any connectors on the control box or motor. 
2. Threading needle. 
3. Raising the machine head. 
4. Repairing or doing any mechanical adjustment. 
5. Machines idling. 

14.

 

Repairs and high level maintenance work should only be carried out by electronic technicians 
with appropriate training. 

15.

 

All the spare parts for repair must be provided or approved by the manufacturer. 

16.

 

Don’t use any objects or force to hit or ram the product. 

Guarantee Time 

Warranty period of this product is 1 year dated from purchasing, or within 2 years from 
ex-factory date. 

Warranty Detail 

Any trouble found within warranty period under normal operation, it will be repaired free of 
charge. However, maintenance cost will be charged in the following cases even if within 
warranty period: 
1. Inappropriate use, including: wrong connecting high voltage, wrong application, 
disassemble, repair, modification by incompetent personnel, or operation without the 
precaution, or operation out of its specification range, or inserting other objects or liquids 
into the product. 
2. Damage by fire, earth quake, lighting, wind, flood, salt corrosive, moisture, abnormal 
power voltage and any other damage cause by the natural disaster or by the inappropriate 
environments. 
3. Dropping after purchasing or damage in transportation by customer himself or by 
customer’s shipping agency 
Note: We make our best effort to test and manufacture the product for assuring the quality. 
However, it is possible that this product can be damaged due to external magnetic 
interference and electronic static or noise or unstable power source more than expected; 
therefore the grounding system of operate area must guarantee the good earth and it’s also 
recommended to install a failsafe device (such as residual current breaker). 
 
 
 
 

Summary of Contents for A9200L-D4S-W-CP-Z

















Reviews: