8
Function Descriptions
1. Remote Control
The product is equipped with a remote control, which uses a button cell battery (if you don’t
use the remote control for a long time, please take out the battery). Note: The buttons on the
remote control correspond to the buttons on the operation panel. Operation methods are
exactly the same.
2. Product Use
Intelligent operation: Connect the machine to a power supply, press the power button and the auto button,
and the machine will run using the sensor. The operation of the motor gear will follow the sensor’s adjusted
value. This operation can be used for the vast majority of applications.
Personalized operation: Connect the machine to a power supply, press the power button, choose your fan
speed selection, and select on or off negative ions and the UV germicidal lamp.
When running the above two kinds of operating modes at night, as long as the sleep button is set, this will
reduce the fan speed to low, and lessen the noise from the unit.
Regular operation: Simply press the timer icon to set the machine’s running time, and it will stop running
automatically after the time is up. (If you need to cancel, press the timer icon on the panel 3 seconds to
cancel this function.)
Child Lock mode: When in child lock mode, the control panel and buttons on the remote control can not
work. To cancel, press the child lock button 3 seconds or press the unlock button on the remote control).
3. To Set the Time
Press the smart key for 5 seconds to bring up the time display: when the Hour digits are flashing, press the
speed key to add 1, press the sleep button to subtract 1, set ”Hour” by clicking the smart key again.
When ”Minutes” digits are flashing, press the speed button to add 1, press the sleep button to subtract 1.
(Press the smart key back and forth for hours and wind speed. Press the wind speed and the sleep button
to add or subtract).
Note: The clock function of this machine is completely independent, time display function accuracy does
not affect the purification.
The battery is powered by the circuit board of the machine, and it will run out if the machine is not plugged
in. The battery is designed for 10 days standby and will run out if the machine is unplugged for more than
10 days. The clock function automatically resets when this happens. You will need to set the clock again.
