background image

1

© Copyright 2018 Zoeller

®

 Co. All rights reserved.

SECTION: Z4.10.305

ZM2609

0318

Supersedes

0615

NOTICE TO INSTALLER:  Instructions must remain with installation.

Model Number:

 ______________ 

 Date Code:

 _______________

  Simplex    

 

Duplex 

  Packaged System 

  Field Assembled System 

Job Name: ____________________________________________
Distributor:

 ____________________________________________

Date of Purchase:

 _________

  Zoeller S/O No.:

 ______________

Contractor:

 ____________________________________________

Date of Installation:

 ____________________________________

System Readings During Start-up:   Voltage

 _____

 Amps 

______

 

OWNER’S MANUAL

MODELS 7011, 7012 & 7013 SUBMERSIBLE GRINDER UNITS

aid in the ownership of a Zoeller submersible wastewater 

product.  Please read and review this manual before installing 

the product.  Follow the steps in this manual for a proper start-

up.  Many items contained within, when followed correctly, 

will not only ensure a long and problem-free life for the pump, 

but also save time and money during installation.  Reference 

ZM2634 for model 7011, ZM2635 for model 7012 and ZM2636 

for model 7013 replacement parts.  Should further assistance 

be necessary please call our Technical Service Department at 

1-800-928-PUMP (7867).

Owner’s Information

Safety Instructions

TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR 

PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY  

INSTRUCTIONS IN THIS MANUAL AND ON THE PUMP.

THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION 

AND OPERATION OF THIS UNIT AND MUST BE KEPT WITH 

THE PUMP.

This is a 

SAFETY ALERT SYMBOL.

When you see this symbol on the pump or in the 

manual, look for one of the following signal words 

and be alert to the potential for personal injury or 

property damage.

Warns of hazards that 

WILL

 cause serious personal    

injury, death or major property damage.

Warns of hazards that 

CAN 

cause serious personal 

injury, death or major property damage.

Warns of hazards that 

CAN 

cause personal injury 

or property damage.

INDICATES SPECIAL INSTRUCTIONS WHICH ARE 

VERY IMPORTANT AND MUST BE FOLLOWED.

THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS 

PRIOR TO PERFORMING ANY WORK ON THIS PUMP.

MAINTAIN ALL SAFETY DECALS.

PUMPS WITH THE “UL” MARK AND PUMPS WITH THE “US” 

MARK ARE TESTED TO UL STANDARD UL778. CSA CERTIFIED 

PUMPS ARE CERTIFIED TO CSA STANDARD C22.2 NO. 108.

CAUTION

Table of Contents

Safety Instructions .......................................................................1
Limited Warranty and Application ..............................................2
Preinstallation Checklist ..............................................................3
General Information .....................................................................4
Pump Wiring Instructions ............................................................5
Typical Indoor Prepackaged System ..........................................6
Indoor Prepackaged Installation Instructions ...........................7
Typical Outdoor Prepackaged System .......................................8
Outdoor Prepackaged Installation Instructions ........................9
Operation .....................................................................................10
Cutter Maintenance .................................................................... 11
Service Checklist ........................................................................12

REFER TO WARRANTY ON PAGE 2.

 

Congratulations on the purchase of a Zoeller submersible 

grinder pump.  For over seventy years the name Zoeller has 

represented the standard for submersible dewatering and 

sewage pumps.  The same high quality workmanship and easy 

maintenance design has been incorporated into this line of 

heavy-duty submersible grinder pumps.  This Zoeller pump will 

provide years of trouble-free service when installed according 

to the manufacturer’s recommendations.

  This manual incorporates the installation, operation, 

maintenance, and service instructions into one document to 

P/N 151086

MAIL TO:

  P.O. BOX 16347 • Louisville, KY  40256-0347

SHIP TO:

  3649 Cane Run Road • Louisville, KY  40211-1961

(502) 778-2731 • 1 (800) 928-PUMP • 

FAX

 (502) 774-3624

Visit our web site:

zoellerengprod.com

Product information presented 

here reflects conditions at time 

of  publication. Consult factory 

regarding discrepancies or 

inconsistencies.

Register your 

Zoeller Engineered Product 

on our website:

http://reg.zoellerengprod.com/

Summary of Contents for I7011













Reviews: