Zoeller 62 HD Series, Repair Manual, Page: 3 / 8

3
© Copyright 2013 Zoeller Co. All rights reserved.
IMPELLER
CASING
0.38-0.76 mm
CLEARANCE GAP
SHIMS
ZEPA0195
IMPELLER CLEARANCE DIAGRAM
62 HD PARTS LIST
NUMBER DESCRIPTION QTY. PART NO.
1 PLUG 3 011162
2 SCREWS 6 004532
3 WASHER, LOCK 22 004497
4 COVER 1 (SEE JOB FOLDER FOR BOM)
5 CORD SEAL 1 (SEE JOB FOLDER FOR BOM)
6 CORD AND CLAMP ASSEMBLY 1 (SEE JOB FOLDER FOR BOM)
7 WASHER, LOCK 4 006402
8 SCREWS, CORD CLAMP 4 001908
9 SEAL, COVER 1 015337 (STANDARD BUNA. SEE JOB FOLDER)
10 THRU WALL TERMINALS, POWER 3 OR 9 013340 (SEE JOB FOLDER)
11 THRU WALL TERMINALS, SENSORS 4 003402
12 PLUG, TERMINAL HOLES 0 OR 6 016940 (6 REQ'D FOR 230/1PH, 200/3PH AND 575/3PH)
13 JUMPER PLATE 4 006495 (4 REQ'D 230/380/460 ONLY)
14 JUMPER WIRE 1 015336 (1 REQ'D 230/380/460 ONLY)
15 UPPER BEARING HOUSING 1 015194
16 SEAL, UPPER BEARING HOUSING 1 011158 (STANDARD BUNA. SEE JOB FOLDER)
17 MOTOR HOUSING 1 015196
18 STATOR 1 (SEE JOB FOLDER FOR BOM)
19 THERMOSENSOR 1 016945
20 HEX WIRING NUTS SEE BOM 013349
21 WASHER, BRASS SEE BOM 013350
22 MOTOR SPACER 1 (SEE JOB FOLDER FOR BOM)
23 STATOR KEY 1 006492 (3PH) 008040 (1PH))
24 MOTOR CLIP 3 006472
25 SOCKET HEAD SCREW 3 006701
26 BEARING, UPPER 1 006704
27 ROTOR 1 (SEE JOB FOLDER FOR BOM)
28 FAN, ROTOR 1 006597
29 RETAINER RING, LOWER BEARING 1 015332
30 BEARING, LOWER 1 015331
31 MOISTURE SENSOR WIRES 1 015261 (MOISTURE SENSOR & WIRE KIT)*
32 SCREWS 16 012860
33 SEAL, ADAPTER 1 015338 ((STANDARD BUNA. SEE JOB FOLDER)
34 ADAPTER 1 015198
35 MOISTURE SENSORS 1 015261 (MOISTURE SENSOR & WIRE KIT)*
36 ROTARY SEAL, UPPER 1 006500 (STANDARD CARBON/CERAMIC SEE JOB FOLDER FOR BOM)
37 SNAP RING 1 006471
38 SEAL, SEAL RETAINER 1 015339 (STANDARD BUNA. SEE JOB FOLDER)
39 SEAL RETAINER 1 015200
40 SCREW, SEAL RETAINER 8 007768
41 ROTARY SEAL, LOWER 1 006500 (STANDARD CARBON/CERAMIC SEE JOB FOLDER FOR BOM)
42 SHIM PACK 1 010508
43 KEY, IMPELLER 1 006462
44 IMPELLER 1 (SEE JOB FOLDER FOR BOM)
45 WASHER, IMPELLER 1 006454
46 SCREW, IMPELLER 1 006463
47 GASKET, PUMP HOUSING (DRY PIT) 1 006499
48 PUMP HOUSING 1 (SEE JOB FOLDER FOR BOM)
49 OIL, 3.8 L (1 GAL.) CAN 3 008419 (3 REQ'D)
50 WASHER, LOCK 1/2" S/S 1 006404
* ONE KIT REQUIRED PER PUMP