Zoef Robot Rob MR08Z, User Instructions

Page: 79 / 83

Operation:
1
．
Power On:
Place the mower inside of the fence line area . Insert the key and start the power. Press the remote Power
button
（ ）
and then press Auto button. Then Press Manual button, move the mower near the
fence line and the mower clockwise direction to the charge station. Then press Auto button. T he
mower drives to the charging station along the fence line. W hen the extruding poles contact with the
paddles, it will retreat to the lawn automatically for mowing operation in auto pattern.
2
．
T he mower can be contro lled by remote in the following way:
a) Place the mower on the f ence line in clockwise direction.
Turn on the power key. When a buzzing sound is heard,
press the remote with button and then press A uto button.
The mower starts to work in auto pattern.
b) Press C harge button to command the mower back to the
charging station for charging. W hen it is fully charged, press button and then
Auto button, the mower will continue back
to lawn to work in auto pattern.
c ) When working in auto pattern, press Manual button to change
to manual pattern. Press F button for forward, B button for
backward, L button for left and R button for right. Press K nives
button for on/off of blades. When working in manual pattern,
press Auto t buton to change back to auto pattern.
d) Press button for pause. To restart the auto pattern, press
button first and then Auto button.
e) When we go into the manual model, please press Cutting Model .
The mower goes into spiral working mode. F and B button make
The mower goes ahead or goes back. L or R make the mower go left or right.
Note:
The direction buttons and Knives button can only be applied when in manual pattern.
W hen go back to the charging station automatically or manually in manual pattern, F button and B
button is void. But R button and L button are still valid.
The remote is not available when the mower drives on or within 20cm near from the fence line.
Please remove the remote battery if the remote is not used for a long time.
There is no function for button “
-
2.5H ” in the remote.