ZOE PPM3, User Manual

Page: 119 / 214

April 2019 N i g h t i n g a l e P P M 3 U s e r ' s G u i d e
11-19
Working With Menus
This menu is also used to set the sweep speed for the eraser bar, turn on or turn
off the display of ECG labels on the main display, and to turn on or turn off the
display of spikes that are drawn in the waveforms to show where the monitor
detects beats.
Figure 45. Setup Waveform Menu with IBPs
You may also choose the size (amplitude) of the invasive pressure waveforms.
Note
– When a communications link with the MPC is established, these settings will be
overridden by those that are received from the MPC. In the case where the sweep speed
is set to 50 mm/sec at the MPC, the PPM3 will use a 25 mm/sec sweep speed instead.
This is the highest sweep speed that is supported by the PPM3.