Zodiac Tradewinds, Owner'S Manual

Page: 12 / 29

12
97042
DECEMBER 2, 2003 (TRADWDINDS - Oval Flat Pool 1” Rims)
6. ASSEMBLE CIRCULAR BOTTOM FRAMEWORK
a. Form a semicircle of rims and foot plates on each end of the pool as shown in Figure 20. Snap rims into foot plates engaging
all tabs as shown in Figure 22. Where rims meet center uprights, insert ends into notch at base of upright (Figure 21).
b. Insert concrete blocks at each foot plate—blocks must be flush with ground surface and level in all directions (Figure 23).
c. Check the level of your pool frame. It is not difficult to make adjustments now. Spending a few extra minutes now may
save you hours of unnecessary work later!
HINT: All sand should be placed inside the rims before installing the pool wall.