Zodiac Proline+ 400, Quick Manual

Page: 18 / 24

18
ENGLISH
¢
BASIC FUNCTIONS
¢
Turn the radio On / Off
1. Turn the on / off knob clockwise to switch the radio on.
2. Turn the on / off knob to the left until you hear a click to turn off the radio.
¢
Volume control
Turn the on / off knob clockwise / counterclockwise to increase or decrease the volume.
¢
Channel selection
The radio can be programmed with up to 255 channels. The Zodiac is delivered
with a standard programming as in the table below. The radio is fully programmable and
can be programmed according to the PTT licenses given. Your dealer will give more
information regarding this. Select the wanted channel by pressing [UP] or [DOWN]. Each
press will change the channel number one step. If you press the button continuously, the
channel number will change continously until the button is released.
¢
Channel tabel
¢
Transmission
Check if the selected channel is in use before you start transmission. Check that the
LED-indicator does not light continuously or blinks before you transmit. If it lights or
blinks, a transmission is active. You can also keep the MON-button pressed to listen to
the channel.
1. Press and hold the transmitting button [PTT].
Speak with a normal voice 3-5 cm from the microphone. The lamp (5) lights red
when transmitting.
2. When you have finished speaking, release the [PTT] to listen.
The radio returns to receive mode.
¢
Reception
Select the wanted channel with the channel knobs. The Lamp (5) lights green when you
receive a transmission. If the lamp blinks green, it means that the sender has not set the
same pilot tone as you. Try to change the pilot tone on your radio.
Channel Frequency
Pilot tone
1 444,600 67,0
2 444,650 67,0
3 444,800 67,0
4 444,825 67,0
5 444,850 67,0
6 444,975 67,0
Zodiac 400