![background image](http://html2.mh-extra.com/html/zodiac/pacer/pacer_instruction-manual_4061266016.webp)
SECTION 4 – REMOVAL AND REFITTING OF DIAPHRAGM
11
Diagram 10
10.a
10.c
10.b
Step 2: Procedure to refit
diaphragm.
Make sure grey retaining ring is
fitted onto diaphragm. Slide the
inner extension pipe with the
diaphragm into the suction hole
until the diaphragm fits snugly
into the groove provided
(Diagram 10.a).
Make sure the diaphragm is
vertical and that the gap of the
throat is not excessive. Tighten
hand-nut securely.
Reset diaphragm.
If the gap of the throat is
excessive (more than 5mm), yet
the diaphragm is not torn or
damaged, push down lightly on
the inner extension pipe so as to
close the gap slightly and hold in
place before tightening the
hand-nut (Diagram 10.b). Replace
deflector wheel (Diagram 10.c).
Re-install pool cleaner and
switch on pump.
NOTE:
The procedure of removing and refitting the diaphragm
could, in itself, rectify a performance problem, eg. working
erratically, as it resets the diaphragm to its correct length.
16774_Zodiac Pacer Manual A5 2/12/08 12:31 PM Page 16
Summary of Contents for Pacer
Page 2: ...Instruction Manual...
Page 4: ...OC 16774...