![background image](http://html1.mh-extra.com/html/zodiac/nature2-spa/nature2-spa_owners-manual_936323007.webp)
When:
What to do:
As needed Shock treat with 1.5 tablespoons of an EPA registered
source of dichlor
1
per 250 gallons (approx. 1000 liters) to
remedy problems which may occur when bathing loads
are high, when successive MPS
2
test strip reading indicate
high demand, when water appears hazy or dull, when
unpleasant odors or eye irritation occur, after heavy wind
and rainstorms or if foam develops.
7
1 Sodium dichloroisocyanurate dihydrate
2 Potassium peroxymonosulfate
3
MPS may cause a lowering of the pH and total alkalinity of your spa water.
Please monitor pH and total alkalinity at least once per week and adjust accordingly.
4 Nature2 Spa Test Strips are available at your local Nature2 Dealer.
Note: As an alternative to MPS
2
, an EPA registered source
of dichlor
1
may be substituted: 1 tablespoon dichlor
1
=
approximately 3 tablespoons MPS
2
.
Important: Perform start-up procedures for spas which
have been unused or unattended. The Nature
2
®
Spa is
not to be used with products containing biguanides. If
these products are being used, DRAIN AND REFILL SPA
WITH FRESH WATER.
Provide Filtration / Circulation
To manage: You need to:
Circulation
Follow the manufacturer’s directions for
keeping the circulating pump in good working
order and operate it at least four (4) hours
a day. Consult your Nature
2
Spa dealer for
optimum run times.
Filtration
Check the spa filter periodically and clean it
as recommended by the manufacturer.