Page 7
Zodiac
®
LumiPower Concrete Niche Assembly | Installation Manual
10. Press the second, smaller polystyrene foam
cover (item 26939) into the mounting ring. This
will prevent dirt and debris entering the niche
during rendering or tiling and will also help
maintain roundness under the weight of the
tiles.
11. Now apply the render or tiles, ensuring that
the finished tile/render surface is level with the
front edge of the mounting ring. See Figure 4.
NOTE:
Tiled interior
pool surface must
be finished flush with
raised edge of mounting
ring.
Waterproof
Sealant
Concrete
Tile and
Glue
or
Render
Mounting Ring
Cable Plug
Protective
Cap
Figure 4. Concrete Niche Final Installation Steps
ATTENTION
Interior pool surface must finish flush with the raised edge of the
mounting ring, or it will not be possible to properly install the light.
Do not install the light until the pool has been washed with acid.
Refer to the LumiPower Pool and Spa LED
Lights Installation Manual, P/N H0812500, for
the installation process of the light engine into
the Concrete Niche.