background image

1

 WARNINGS

GENERAL WARNINGS

•  Failure to respect the warnings may cause serious damage to the pool equipment or cause serious injury, even death.

• 

Only a person qualified in the technical fields concerned (electricity, hydraulics or refrigeration) is authorised to 

perform any servicing or repairs to the appliance. The qualified technician working on the appliance must use/

wear personal protective equipment (such as safety goggles and protective gloves, etc.) in order to reduce the 

risk of injury occurring when working on the appliance.  

• 

Before handling the appliance, check that it is switched off and isolated.

• 

The appliance is intended to be used for pools and spas for a specific purpose; it must not be used for any purpose other 

than that for which it was designed.

• 

This appliance is not intended for use by persons (including children) having a physical, sensory or mental disability, or by 

persons lacking experience or knowledge of the appliance, unless they are first instructed or are supervised during the use 

of the appliance by a person responsible for their safety.

• 

Keep the appliance out of the reach of children.

• 

The appliance must be installed according to the manufacturer’s instructions and in compliance with local and national 

standards. The installer is responsible for installing the appliance and for compliance with national installation regulations. 

Under  no  circumstances  may  the  manufacturer  be  held  liable  in  the  event  of  failure  to  comply  with  applicable  local 

installation standards.

• 

For any work other than the simple user maintenance described in this manual, the product should be referred to a qualified 

professional.

• 

Incorrect installation and/or use may cause serious damage to property or serious injuries (possibly causing death). 

• 

All equipment, even postage and packing paid, travels at the risks and perils of the recipient. The latter shall issue reserves 

in writing on the carrier's delivery slip if damage is detected, caused during transport (confirmation to be sent to the carrier 

within 48 hours by registered letter). In the event that an appliance containing coolant has been turned on its side, mention 

your reservations in writing to the carrier.

• 

If the appliance suffers a malfunction, do not try to repair it yourself; instead contact a qualified technician.

• 

Refer to the warranty conditions for details of the permitted water balance values for operating the appliance.

• 

Deactivating, eliminating or by-passing any of the safety mechanisms integrated into the appliance shall automatically void 

the warranty, in addition to the use of spare parts manufactured by unauthorised third-party manufacturers.

• 

Do not spray insecticide or any other chemical (flammable or non-flammable) in the direction of the appliance, as this may 

damage the body and cause a fire.

• 

Zodiac® heat pump, filter pump and filter appliances are compatible with the most commonly used types of pool water 

treatment systems.

• 

Do not touch the fan or moving parts and do not place objects or your fingers in the vicinity of the moving parts when the 

appliance is in operation. Moving parts can cause serious injury or even death.

WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES

• 

The power supply to the appliance must be protected by a dedicated 30 mA residual current device, complying with the 

standards and regulations in force in the country in which it is installed.

• 

Do not use any extension lead when connecting the appliance; connect the appliance directly to a suitable power supply.

• 

Before carrying out any operations, check that:

-  The voltage indicated on the appliance information plate corresponds to the mains voltage. 

-  The power grid is adapted to the power requirements of the appliance, and is grounded. 

-  The plug (where applicable) is suitable for the socket.

• 

In the event of abnormal operation or the release of odours from the appliance, turn it off immediately, unplug it from its 

power supply and contact a professional.

• 

Before servicing or performing maintenance on the appliance, check that it is powered off and completely disconnected 

from the power supply. Moreover, check that the heating priority (where applicable) is deactivated and that any other 

device or accessory connected to the appliance is also disconnected from the power supply.

• 

Do not disconnect and reconnect the appliance to the power supply when in operation.

• 

Do not pull on the power cord to disconnect it from the power supply.

• 

If the power cord is damaged, it must be replaced by the manufacturer, its technician or a qualified person to guarantee 

safety.

• 

Do not perform maintenance or servicing operations on the appliance with wet hands or if the appliance is wet.

• 

Before connecting the appliance to the power supply, check that the connection unit or socket to which the appliance will 

be connected is in good condition and shows no signs of damage or rust.

• 

For any component or sub-assembly containing a battery: do not recharge or dismantle the battery, or throw it into a fire. 

Do not expose it to high temperatures or direct sunlight.

• 

In stormy weather, disconnect the appliance from the power supply to prevent it from suffering lightning damage.

• 

Do not immerse the appliance in water (with the exception of cleaners) or mud.

WARNINGS ASSOCIATED WITH LIGHTING SYSTEMS

• 

For operation only with safety isolating transformer properly certified as being in compliance with the requirements 

of EN/IEC 61558-2-6 standard. 

• 

In Australia, lights must be powered by an Australian approved SELV driver/power source.

• 

In Australia, ensure that the lighting system is installed by a suitably qualified person only (e.g. Registered pool builder and/

or qualified electrician), in accordance with AS/NZ 3000:2007 standards.

• 

Suitable for Maximum Depth of 4 meters.

• 

The external cable of this light cannot be replaced; if the cable is damaged, the light must be replaced.

• 

The light source contained in this light must only be replaced by the manufacturer or its service agent or a similarly qualified 

person.

• 

Do not look directly at the light source when lit. 

Recycling

This symbol means that your appliance must not be thrown into a normal bin. It will be selectively collected for the 

purpose of reuse, recycling or transformation. If it contains any substances that may be harmful to the environment, 

these will be eliminated or neutralised. Contact your retailer for recycling information.

Summary of Contents for Led NL













Reviews: