27
First installation
Once all the connections have been made, and after having carefully checked the
exactness, it is possible to turn on the TV and then the device via the supplied remote
control. The display will show the writing
Strt.
In this menu you can:
●
[
Region
] press the
Vol-/Vol+
keys to select the country where the device will be
used. This choice is critical because for a correct reception of the channels.
●
[
Language
] press the
Vol-/Vol+
buttons to select the language used by the device.
●
[Display Mode]
press OK then the
CH-/CH+
buttons to select the video resolution
used by the device. The device will start in
576p
in
Scart
or
720p@50Hz
in
HDMI
.
We recommend that you select
1080p_50
for FULL HD televisions or
720p_50
for
HD TVs.
●
[Aspect Mode]
select
Auto.
●
[Antenna Power
] select the option
On
to supply the signal on the antenna output.
Highlight the word
OK
in the OSD and then click the
OK
button on the remote control.
Automatic channel tuning will start immediately. This process is completely automatic
but can last several minutes. After tuning, you can watch TV.
In the lower part, in menu mode, there is a legend with the active
keys on the displayed page.
●
Use the [arrows
Vol-/Vol+
and
CH+/CH-
to move through
the menus and change their settings.
●
Tap on thebutton
OK
to confirm the selection.
●
Tap
Exit
to exit.
1.6 PlayBack
Please connect a USB memory (already formatted) to the USB port of the device. See
the following figure.
Press the button
USB
then tap on button 1 (move to Video/Music/Images) to view the
list of what was recorded. Alternatively, press the button
Menu
, then move to the menu
MediaPlayer
, then
Video/Music/Image
. Select the file from the video to play and
touch
OK
. Press
Stop
to stop playback.
Summary of Contents for KORA DZR-3341
Page 35: ......
