TROUBLESHOOTING
KONTIKI ACCESSORIES
PART ILLUSTRATION
PART NO.
DESCRIPTION
1. W24100
Return Line Diverter
Use when no other return inlet
return inlet directional fittings exist.
2A. W90153
Retrofit Eyeball Return
(for 11/2" return inlet)
Line Diverter
Use to replace standard
2B. W90155
directional inlet eyeballs
(for 2" return inlet)
3. W26705
The Leaf Catcher
with 4 1/2" Hose Connector
Use when heavy debris or
leaf situations exist.
3. W46155
Large Wheel Deflector
Use when extra clearance is
needed at steps or other
obstacles.
3
2A
1
2B
4
If you experience a problem with your Kontiki, please review the installation section and insure all steps have been followed
correctly.
PROBLEM
SOLUTION
1. Machine does not move, or moves sluggishly.
•
Insure ideal flow is being attained using Pool Pulse.
Note: In water 60˚ F or less, it may be necessary to increase flow to
compensate for the reduced flexibility of the hose and diaphragm.
•
Check diaphragm for damage or wear (see Care and Maintenance).
•
Backwash filter and empty pump basket.
•
Check for air in system. If water level in pump basket drops, check
hose connections, tighten all fittings at pump, check gasket in pump
basket for wear.
2. Machine does not cover entire pool.
•
Insure ideal flow is being attained using Pool Pulse.
•
Point return jets as far down as possible.
•
Make sure hose does not have memory from being coiled
(see Care and Maintenance).
•
Confirm proper hose length
3. Machine sticks on ladder.
•
Insure ideal flow is being attained using Pool Pulse.
•
Remove ladder if possible
•
Install large wheel deflector.
4. Machine sticks in steps.
•
Insure correct amount of hose is being used (see Assembly).
Shorten if necessary.
•
Insure the Flowkeeper is on the number 1 setting.
•
Install large wheel deflector.
5. Machine stays on walls or edge of pool.
•
Insure the Flowkeeper is on the number 1 setting.
IF FURTHER ASSISTANCE IS REQUIRED, PLEASE CALL 1-888-786-7797.
10
