Zodiac EvoluX iQ, Owner'S Manual

Page: 17 / 28

If tangling occurs, follow these steps:
1. Remove the cleaner from the pool using
the Lift System. When the cleaner is within
arm's reach, use the handle to remove
from the water. Never lift the cleaner out of
the pool by the fl oating cable or swivel.
2. Hold the cleaner vertically to drain.
Figure 15. Keep Cleaner Vertical to Drain Water
3. Unplug power to the cleaner at the control
box.
Figure 16. Unplug
4. Remove the cleaner from the pool and
untangle all kinks and coils in the power
cable. Start at the cleaner head. Lay the
cable in the sun to loosen any tangling
memory.
Figure 17. Untangle
Clean the Filter Canisters
The fi lter canisters should be cleaned at the end of
each cycle.
1. Remove the cleaner from the water using
the Lift System and let the remaining water
drain.
2. Set the unit on four wheels.
3. Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
2
1
Figure 18. Lift Cleaner Cover
Page 17
Zodiac
®
EvoluX
™
iQ Robotic Pool Cleaner
|
Owner's Manual