36
36
◼
Power On/Off
1)
Turn the Power switch clockwise to turn
the radio power ON and turn the switch
counter clockwise to turn the radio power
OFF.
2)
If you turn on the radio power, all the
icons will be displayed on the LCD with
backlight in orange with beep sound.
3)
The latest saved channel is displayed on
LCD.
◼
Transmitting
1)
Select the desired channel by turning the
Channel Switch.
2)
Hold down the PTT button for duration of
TALK and speak in to the MIC.(Keep the
radio 3~4cm away from your mouth for
clear voice communication.)
3)
The LED lights red and antenna bar icon
is displayed according to the output
power of transmitting on the LCD at
transmitting mode.
4)
Release the PTT button to receive.
◼
Receiving
1)
Select the desired channel to receive by
Channel Switch.
2)
The LED lights green while receiving.
3)
If the sub-tone (CTCSS/DCS) of the
incoming call
doesn’t match your sub-
tone, you cannot hear the voice.
4)
The LED lights green and the strength of
receiving signal is displayed on the LCD.
5)
If you need to receive all the signals,
Summary of Contents for Easy Hunt
