Additional Informations
There may be various reasons for the abnormal operation of the receiver.
Check the receiver according to the procedures shown below.
A.1 Trouble Shooting
If the receiver does not work properly after checking it, please contact the
dealer. Don't open the receiver. It may cause a dangerous situation.
The power cord is not
plugged in.
Wrong connection of the
Audio/ Video output of the
receiver to TV.
Wrong connection of the
satellite antenna.
No or Bad signal message
appears.
Audio muting.
Incorrect values of some
tuner parameters.
The batteries in the remote
control are not properly
inserted or exhausted.
Check whether the power cord is
plugged in to the wall outlet.
Connect the Audio/Video output
of the receiver to TV correctly.
Connect the antenna cable
correctly.
Check other device connected
between LNB and the receiver,
Press the Mute button.
The receiver can't receive
the signal.
Check the antenna cable,
replace the cable, or connect the
cable to the receiver tightly.
Set the values of tuner
parameters correctly in the
Installation menu.
Check whether the batteries are
inserted correctly in your remote
control.
Check the batteries, and if they are
exhausted, replace them.
or adjust the antenna position.
Symptom
Cause
Remedy
The display on front
panel does not light up.
No picture or sound.
No picture.
The remote control does
not work
TV power off.
Turn TV on.
31
