15
Clear Cover
Replace
1 . Turn off power supply .
2 . Remove the 4 cover screws, disconnect the ribbon wire and remove the cover .
3 . From the inside, push the center pin out of the plasti rivet, remove (pliers may be needed) .
4 . Gently pull the plasti rivets out of the cover & remove the clear cover .
5 . Lay paper down (to avoid scratching the replacement cover) and place the new cover on the paper .
6 . Insert the plasti rivet thru the hole in the clear cover and push the anchor partially into the spacer (to hold the spacer
in place) .
7 . Set the metal cover into the clear plastic cover .
8 . Insert the pins through the anchor to lock the cover in place .
Summary of Contents for DuoClear
Page 1: ...Troubleshooting Manual ...
