Figure 8. Align Control Unit with Caddy Hook
10. Press Control Unit onto the caddy hook
until it snaps and locks into position
(Figure 9).
Figure 9. Attach Control Unit to Caddy
Connect to a Power Source
WARNING
Failure to comply with the following warnings
can increase risk of fire or electrocution
which can result in property damage and
serious injury, including loss of life.
PREVENT ELECTRICAL SHOCK
•
Keep the Control Unit at least 3.5 m from the
edge of the pool.
•
The cleaner is to be installed in accordance
with the relevant requirements of the
Australian wiring rules AS/NZS 3000. Also
refer to the installation instructions relating to
the swimming pool equipment for which the
cleaner will be an integral part. The cleaner
is to be supplied through a Residual Current
Device (RCD) with a rated residual operating
current of 30mA.
•
Do not use an extension cord to connect the
Control Unit.
•
Do not allow anyone to swim while the cleaner
is in the pool.
•
The Control Unit is water-resistant, not
waterproof. In order to prevent electrocution,
never submerge the Control Unit or leave
exposed to inclement weather.
1. Unscrew the protective cap for the floating
cable from the side of the Control Unit by
turning counter-clockwise.
2. Grip the notched end of the floating power
cable, insert into the Control Unit and click
to lock (Figure 10).
"CLICK"
"CLICK"
"CLICK"
"CLICK"
Figure 10. Remove Protective Cap and Connect
Power Cable
Page
8
Zodiac
®
Duo-X
™
Robotic Pool Cleaners
|
Owner's Manual
