18
5.4 I Replacing the brushes
Are the brushes worn?
•
Replace the brushes if the wear indicators are similar to example :
:
Remove the worn brushes
•
Remove the tabs from the holes in which they are fi xed.
Positi on the new brushes.
•
Start by fi tti ng the side without tabs under the brush holder (see image )
.
•
Roll the brush around its support, slide the tabs into the att achment holes and pull on the end of each tab unti l its
edge passes through the slit (see image )
.
•
Cut the tabs using a pair of scissors for them to be level with the other blades (see image )
.
EN
