10
Chronograph: Intermediate or interval timing
1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.
*Note: Although the chronograph hands have stopped, the movement
continues to record the current timing.
3. Make up the measured time:
Press pusher B again and the 3 chronograph hands are quickly
advanced to the ongoing measured time. To continue to record
intervals, continue to push pusher B.
4. Press pusher A to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press
pusher B.
Adjusting the chronograph hands to zero position
1. Pull crown out to position III (all three chronograph hands are in their
correct or incorrect zero position).
2. Keep pushers A and B depressed simultaneously for at least 2
seconds (the center stop-second rotates by 360° - corrective mode
is activated).
3. Press pusher A to single step the center stop-second hand. Press
and hold pusher A to advance the center stop-second hand quickly.
Press pusher B to advance to the next hand.
4. Press pusher A to single step the hour counter hand. Press and hold
pusher A to advance the hour counter hand quickly. Press pusher B
to advance to the next hand.
5. Press pusher A to single step the minute counter hand. Press and
hold pusher A to advance the minute counter hand quickly.
6. Return the crown to position I.
