Zodiac Pool Systems X7 Quattro, User Manual

Page: 10 / 12

•
Then simply remove the Diaphragm from the holder by pulling
it upward (Figure 25) .
•
2
nd
step: fitting the new Diaphragm
•
Place the new Diaphragm
on the handle and replace the
handle in the casing by aligning
the notches correctly with
the grooves
(Figure 26) .
•
Pull on the handle so as
to ensure that the edge of
the Diaphragm is visible
(Figure 27) .
•
Place the upper part of the case in the lower part and screw the
2 parts together.
•
Reinsert the case in the device, after having put the tightening
ring back in place (Figure 28) .
•
Reposition the housing around the case (Figure 29) .
•
Place the handle upright and push the clips back into place.
Changing the Diaphragm
2 3
Figure 25
Figure 26 Figure 27
Figure 28
Figure 29
Diaphragm
Ring
Notice X7 ANG.qxd 9/12/08 10:31 Page 12