Section 8. Troubleshooting
8.1 Jandy TruClearXL Cell LEDs and Display Messages
Cell
LED
Color
Status
Description
Output
Chlorinating = On
Not Chlorinating = Off
Resting = Off
Displayed Message
Line 1
-
Line 2
Green
Good
Start up message #1
Off
Hello (if English)
-
Press up to change
Green
Good
Start up message #2
Off
Hello (if English)
-
Press up to change
Green
Good
Language selection sub-
menu
Off
Hello (if English)
-
Press up to change
Green
When the
associated
pump is off, or
at 0 RPM's.
Standby
Off
Standy
-
[blank]
Green
Good
Chlorination
On
Chlorinating
-
[output level]%
Red
Low Salt
PIB has detected a low salt
condition
Off
Check Salt
Green
High Salt
Salt level is above XXXX
On
N/A
Red
Short
• When the system is running
within a valid chlorination
window and detects a cell
short circuit or overload
(conductivity problem).
• High salt
Off
Check Salt and Inspect
Cell
Red
Not Level
Cell is not level (+/- 5
degrees out of alignment).
Off
Check Cell Orientation
Red
Low Temp
Turn off at 55F and below
Off
Cold Water
WARNING
Always turn pump off prior to attempting service or repair. Your pump and filter system is operated under
pressure and pressure must be released before you begin to avoid system damage or personal injury. Open the
air relief valve on your pool filter to release the pressure in the system.
