2.
HOW TO INSTALL THE LIGHT
4
supplies at the rear of the appliance
If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its services agent.
FAILURE TO ABIDE BY THIS WARNING COULD RESULT IN AN EXPLOSION, DEATH,
INJURY AND PROPERTY DAMAGE.
Please note that in some models the interior lights are LEDs that cannot be changed.
Other models require a
bulb. Not all bulbs will
fit
your refrigerator - be sure
to replace the bulb with one of the same size, shape and
To Change the Light Bulb:
I. Unplug refrigerator or disconnect power.
II. Remove light shield when applicable.
III. Remove light bulb and replace with one of the same size, shape
and
IV. Replace light shield when applicable.
V. Plug in refrigerator or reconnect power.
Light
picture
